Skip to main content

More right-solid
Show sorted alphabetically
More right-solid
Show sorted alphabetically
More right-solid
SHOW DETAILS
up-solid down-solid
eye
Title
Date Archived
Creator
Thingiverse Archive
May 1, 2021 Steve Douville (thebuyer2016)
data
eye 2
favorite 0
comment 0
Menkaure (also Menkaura, Egyptian transliteration mn-k3w-Rˁ), was an ancient Egyptian king (pharaoh) of the fourth dynasty during the Old Kingdom, who is well known under his Hellenized names Mykerinos (Greek: Μυκερίνος) (by Herodotus) and Menkheres (by Manetho). According to Manetho, he was the throne successor of king Bikheris, but according to archaeological evidence he was rather the successor of king Khafre. Africanus (from Syncellus) reports as rulers of the fourth dynasty...
Topics: stl, Egypt, Egyptian, thingiverse, Sculptures
Thingiverse Archive
May 1, 2021 Jimmy Xing (reticyte)
data
eye 3
favorite 0
comment 0
M42X0.75 (T thread) male to Nikon lens F-mount female adaptor. It is specifically designed for QHY8 CCD and a Nikon lens (F-mount). This part has a spacing distance of 26.5mm. If you just need a different spacing distance, contact me I can quickly upload a different one when I see your message.
Topics: stl, thingiverse, Other
Thingiverse Archive
May 1, 2021 Malcolm Hare (MalcolmHare1972)
data
eye 1
favorite 0
comment 0
** 19/4/2021 - Added Hose Attachment piece. - This is so you can attach a piece of hose to the gutter to drain off water into your own container/water butt. If printed on its side (with support) so the gutter is vertical then the support that partially fills the hose "hole" might as well stay there as a debris blocker. Rotate the gutters so they stand "tall" and (for the non holed one) you wont need supports Printed at 3mm and its a good sturdy gutter piece.. The ends &...
Topics: stl, Outdoor & Garden, rain gutter, gutter, guttering, drain, thingiverse
Thingiverse Archive
May 1, 2021 Corey Aviza (Abiza27)
data
eye 0
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
May 1, 2021 Arthur Schlauch (aschlauch)
data
eye 0
favorite 0
comment 0
Heroscape C3V Ebon Armor
Topics: stl, Toys & Games, heroscape, C3V, thingiverse
Thingiverse Archive
May 1, 2021 Alego Gotty (Alegoty)
data
eye 0
favorite 0
comment 0
Hello, this is an addition for Lea and the internal portion of InJoyUs. Printed from TPU and with support. With a little lube, the addon is easy to put on. I am grateful for any suggestions for improvement ;-) ########################################### Hallo, dies ist ein Zusatz für Lea und das interne Teil von InJoyUs. Gedruckt aus TPU und mit Support. Mit ein wenig Gleitgel lässt sich das Addon leicht aufsetzen. Für Verbesserungsvorschläge bin ich dankbar. ;-)
Topics: stl, sextoy, Hobby, Adult, thingiverse, strapon, adult_toy, injoyus
Thingiverse Archive
May 1, 2021 Charles Howland (chzhowland)
data
eye 1
favorite 0
comment 0
This is a tape measure mount made to fit on the broad side of a 2x4 so you can clip your tape measure on it. Mounted with two screws.
Topics: stl, Tape Measure, holder, Organization, Mount, thingiverse
Thingiverse Archive
May 1, 2021 Axel BORDEAUX (Axel56)
data
eye 0
favorite 0
comment 0
Voici mon support de capsule dolce gusto pivotant. Imprimé sur CR10-V3 en 0.2mm et 20% de remplissage. Il y a besoin d'un boulon M8x35 et d'un écrou pour l'assemblage. N'hésitez pas à m'envoyer des photos si vous l'imprimez.
Topics: stl, thingiverse, Kitchen & Dining
Thingiverse Archive
May 1, 2021 Benjamin Summerfield (benji)
data
eye 0
favorite 0
comment 0
Print with 3-5 shells and 50-80% infill. Requires 4 x M3 Screws 10-14mm long.
Topics: stl, thingiverse, Machine Tools
Thingiverse Archive
May 1, 2021 Jon Sagebrand (jonsag)
data
eye 0
favorite 0
comment 0
This is an enclosure for a component tester of my design. You can by a tester like this for $5 (without enclosure), but why buy when you can build one yourself for $100? :-) For software, parts list and build instructions of the electronics, go to https://github.com/jonsag/avrComponentTester. To customize, download all scad files and edit casing.scad. You will also need the (incredible) OpenSCAD library at https://github.com/nophead/NopSCADlib and adapt the paths to this library in the other...
Topics: stl, GM328, ATmega328P, component_tester, customizable, Electronics, thingiverse
Thingiverse Archive
May 1, 2021 Corey Aviza (Abiza27)
data
eye 0
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
May 1, 2021 Lukas 3D (koppellu)
data
eye 1
favorite 0
comment 0
Fox Alexa holder(Echo Dot 3) Recommended for alexa with clock.
Topics: stl, Amazon_Alexa, Amazon_Alexa_Dot, Amazon_Alexa_Echo_Dot, fox, holder, Alexa, thingiverse, Tool...
Thingiverse Archive
May 1, 2021 Jeann Moura (jeannmoura)
data
eye 3
favorite 0
comment 0
Summary More one tool holders /object on Thingiverse, but this i did =) Instructions I recommend printing it from SD card (to avoid problems with USB) It is not necessary support! I used PLA to print this. *******************************************************************
Topics: stl, thingiverse, 3D Printer Accessories
Thingiverse Archive
May 1, 2021 Yehuda Newman (OyVey)
data
eye 0
favorite 0
comment 0
Simple bracket to support the edge of a shelf, or to build a small box. Best used for a 5-sided structure, where the back of the bookcase, or the bottom of the box provides the angular shear strength. Approx 8" long, 3/4" on each leg. Holes are countersunk to accommodate #8 wood screws. Best printed with the hypotenuse (open side) facing down.
Topics: stl, thingiverse, Organization
Thingiverse Archive
May 1, 2021 Colin & Dijana Harvey (CHarvey6366)
data
eye 1
favorite 0
comment 0
Topics: stl, thingiverse, 3D Printers
Thingiverse Archive
May 1, 2021 Shawn Owen (MoxieEngMach)
data
eye 1
favorite 0
comment 0
4" OD Turbo Fan Engine style drink coaster.
Topics: stl, turbo_fan, Decor, drink_coasters, bottle_coaster, can_coaster, Beer_coasters, jet_engine,...
Thingiverse Archive
May 1, 2021 Števo Bojačko (Boj3D)
data
eye 0
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, thingiverse, DIY
Thingiverse Archive
May 1, 2021 Bao Xin Việc (baoxinvieccom)
data
eye 0
favorite 0
comment 0
Ngày nay, không chỉ cần có bằng cấp như bằng đại học, cao đẳng… để thuyết phục các nhà tuyển dụng khi đi xin việc. Mà bạn còn cần các chứng chỉ ngoại ngữ, tin học đi kèm để chứng minh trình độ năng lực, đặc biệt trong thời đại công nghệ thông tin và xu thế hội nhập quốc tế ngày càng phát triển. Tuy nhiên, bạn có thể bị thiếu chứng chỉ tin học vì nhiều lý do khác nhau. Vậy...
Topics: stl, thingiverse, 3D Printer Extruders
Thingiverse Archive
May 1, 2021 Wes Hogentogler (whogentogler)
data
eye 0
favorite 0
comment 0
This is a remix of the Dragons egg pendant light shade. I made the shade so it is able to be mounted onto a floor lamp as pictured. It can also be separated in two for easy access to the light bulb.
Topics: stl, thingiverse, Decor
Thingiverse Archive
May 1, 2021 Echo Mirage (echomirage)
data
eye 0
favorite 0
comment 0
Organizer tray with 6 small compartments and 1 long compartment, for sorting/storing different sizes of Xacto and/or scalpel blades. The tray fits into a 25-card box for collectible cards (such as those made by UltraPro, and works for the boxes with either a hinged or a separate lid). It will actually fit into any standard card box, but the height is made for a 25-card box. You could also skip the card box altogether. The hollow support pillars friction-fit 6mm tall x 6mm diameter cylindrical...
Topics: stl, magnetic, XACTO, blade, scalpel, thingiverse, Tool Holders & Boxes
Thingiverse Archive
May 1, 2021 Sandro Bauer (Sa_Ba)
data
eye 0
favorite 0
comment 0
Did it ever happen to you that you forgot the autolevel-sensor with his white foam-ring after autoleveling on the nozzle of your printer? By starting the next print and heating the nozzle the foam is gone and the sensor is defect... means that it can not be clamped over the nozzle anymore but the foil-sensor would work. For that I designed that ring with some spring-elements. So carefully remove the melted white foam-ring completely from the sensor-foil (shown at the right side of the foto) and...
Topics: stl, sensor, holder, autoleveling, 3D Printer Accessories, thingiverse, Anycubic_Mega_Pro
Thingiverse Archive
May 1, 2021 Arthur Schlauch (aschlauch)
data
eye 0
favorite 0
comment 0
Heroscape C3V Deathstrike Thrall
Topics: stl, Toys & Games, heroscape, C3V, thingiverse
Thingiverse Archive
May 1, 2021 baycan akcayoz (baycana)
data
eye 0
favorite 0
comment 0
Ambient QP 4140 D.30 Part D 33mm 3 mm eva
Topics: stl, QP4140, ambient, Parts, sound parts, boompole, sound, thingiverse, c clamp
Thingiverse Archive
May 1, 2021 Aled Gunstone (Celticsun85)
data
eye 0
favorite 0
comment 0
from a video on tiktok about teetotums d4 d6 d8 d10 d12 d100 the d20 is still under development (send help) from https://www.thingiverse.com/grumpyrobot/designs https://www.tiktok.com/@almostsurely?lang=en
Topics: stl, d100, D10_dice, D8_dice, D12_Dice, d4_dice, D6_dice, dice, dnd, thingiverse, 3D Printing,...
Thingiverse Archive
May 1, 2021 dd lorence (any_user)
data
eye 0
favorite 0
comment 0
If you are a DIY person, and if you have a whirlpool dishwasher (mine was model WDF750SAYM3) and have run into a problem after a few years, where the dishwasher does not seem to clean properly any more, you may have a problem with the pump motor having worn out the original cheap graphite bearings (2) in the motor. When they are worn the pumping function is reduced. Check online for the actual problem to see that replacing the bearings could be a possible solution. Rather that spend a couple...
Topics: stl, thingiverse, DIY
Thingiverse Archive
May 1, 2021 Larry Deaton (lmdeaton1)
data
eye 0
favorite 0
comment 0
Cupholder insert for center rear cupholder tray in 2015 Toyota Highlander with captain's chair configuration for rear seats.
Topics: stl, toyota_highlander, cup, cup_holder, rear, cupholder, holder, seat, toyota, thingiverse, 3D...
Thingiverse Archive
May 1, 2021 Steve Douville (thebuyer2016)
data
eye 0
favorite 0
comment 0
Anlamani is particularly well known from a stela discovered in a temple at Kawa. The stela records his mother Nasalsa's visit to Kawa to watch his official coronation as king. It also notes his decision to make four of his sisters as "sistrum-players" in the National temple of Amun at Jebel Barkal and reports the king's campaign against certain nomadic tribes who threatened Kawa.[citation needed] Two granite statues of this king have been found in Jebel Barkal while a block from...
Topics: stl, Egypt, Egyptian, thingiverse, Sculptures
Thingiverse Archive
May 1, 2021 Isaac Foraker (codemer)
data
eye 0
favorite 0
comment 0
This simple XYZ calibration structure is modeled on the axis guides of most CAD and slicer software. The intention is for the model to be big enough to take meaningful measurements to calculate adjustments to your stepper settings while also printing quickly with minimal filament. The model is 100mm x 100mm x 100mm. If you lose track of which axis is which simply orient the model to the axis guides in your favorite modeling software.
Topics: stl, calibration, 3D Printing Tests, test, thingiverse
Thingiverse Archive
May 1, 2021 Andreas Teufel (Evil_)
data
eye 0
favorite 0
comment 0
Das ist ein Flaschentrockener für Sodastreamflaschen. Er wird auf den Deckel gestellt und dann die Flasche darauf. Wenn das Wasser dann abtropft rinnt das Wasser in den Deckel.
Topics: stl, Sodastream, Flaschentrockner, Kitchen & Dining, thingiverse
Thingiverse Archive
May 1, 2021 Nirvash 12 (Nirvash12)
data
eye 0
favorite 0
comment 0
At some point in time, the Powerfix Wall mount pegboard changed the holes from squares to circles, and a square peg won't fit into the circular holes unless you trim the corners with side cutters. Since this isn't very elegant, I made this remix. :)
Topics: stl, pegboard, lidl, tape_holder, pegboard_mount, powerfix, thingiverse, Tool Holders & Boxes
Thingiverse Archive
May 1, 2021 Arthur Schlauch (aschlauch)
data
eye 0
favorite 0
comment 0
Heroscape C3V Darkprowl Thrall
Topics: stl, Toys & Games, heroscape, C3V, thingiverse
Thingiverse Archive
May 1, 2021 truc machin (_Zac01_)
data
eye 0
favorite 0
comment 0
un cube tout simple 1x1x1 cm
Topics: stl, thingiverse, Sculptures
Thingiverse Archive
May 1, 2021 Chief Gyk (ChiefGyk3D)
data
eye 0
favorite 0
comment 0
This is a remix of a case I found to fit my RockPro 64. But the lid didn't fit the NVMe to PCIE x4 adapter properly so I removed a post and then added some logos to make it pretty. Use Prusa Slicer to swap filaments at the layers. I recommend reinforcing the posts you screw into with some superglue or something, but I recommend short M3 screws to mount the board as well as lock the lid. It has a slot for a 40mm Noctua fan which I plan to upgrade to when I get the passive heatsink. You will need...
Topics: stl, pine64, doge, bitcoin, monero, chiefgyk3d, Electronics, tiktok, thingiverse, cryptocurrency,...
Thingiverse Archive
May 1, 2021 (denepO)
data
eye 1
favorite 0
comment 0
this is a ergonomic, one hand usable bottle opener with a snapping mechanism, which will lock the cap in as soon as it is placed at the top of the bottle. for opening hold your palm against the lever and your fingers at the bottle, then press. there is an easy way to get the cap out again. maybe you will find it out. i used magnets for the snapping mechanism. you can find them on amazon for example. the slots are for: ROUND D10x3 NEODYM MAGNETS you have one try to mount them in the right...
Topics: stl, bottle_opener, magnet, snapfit, fridge_magnet, bottle, cap, thingiverse, Gadgets
Thingiverse Archive
May 1, 2021 ma rk (mark2030)
data
eye 0
favorite 0
comment 0
This is a set of gears for the Phigets motor commonly used in AgopenGPS auto steer projects. There are 2 different sets of brackets, some steering wheels have a steeper arms and need different angle to hold the gear. I print it in TPU with alot of infill. https://youtu.be/KP4Xwf89FbE
Topics: stl, thingiverse, DIY
Thingiverse Archive
May 1, 2021 yuzu357 (yuzu357)
data
eye 0
favorite 0
comment 0
This is an LED mount for the CR-10V2. A plate LED can be inserted. (60x10x2mm) これはCR-10V2用のLEDマウントです。 秋月電子通商で販売されているLEDモジュールを入れることができます。[AE-LED1X3-12V] 上記LEDモジュールでは長時間利用でも発熱は見られませんでしたが、他社製品を使う際は発熱に気を付けてください。 PLA以外の素材で耐熱性を上げることも良いと思います。
Topics: stl, LED, Led_Holder, LED_light, creality_cr10v2, 3D Printer Parts, led_mount, CR-10, CR10,...
Thingiverse Archive
May 1, 2021 mouamar Tanash (mouamar)
data
eye 0
favorite 0
comment 0
BTT TFT24 for Anycubic mega zero V1 not sure if the mount will fit anycubic mega zero v2 but feel free to try it out and let us know
Topics: stl, LCD_Mount, Anycubic mega zero V1, TFT24, bigtreetech_tft24, Anycubic mega zero, 3D Printer...
Thingiverse Archive
May 1, 2021 Bainbridge DeWinter (Bainbridged)
data
eye 0
favorite 0
comment 0
The title seems self explanatory
Topics: stl, Toy & Game Accessories, NSFW, kdm, kingdom_death, kingdom_death_monster, Terrain,...
Thingiverse Archive
May 1, 2021 Arthur Schlauch (aschlauch)
data
eye 0
favorite 0
comment 0
Heroscape C3V Brimstone
Topics: stl, Toys & Games, dragon, heroscape, C3V, thingiverse
Thingiverse Archive
May 1, 2021 Maxim Vladimirovich (makcigan)
data
eye 0
favorite 0
comment 0
My job is April 2019.
Topics: stl, keychain, mark2, Keychains, markII, toyota, thingiverse
Thingiverse Archive
May 1, 2021 Greg Bygotti (1cheeseball1)
data
eye 0
favorite 0
comment 0
I saw a video of someone who was using the super cool Azeron Gampad, and I thought that it didn't look very ergonomic. I found an "upright" ergonomic mouse design on Thingiverse and some other designs and remixed them together into this monstrosity. Links below for general assembly and BOM. I did not steal anything from the original designer (and you can tell that my parts are far more rough looking!). This is simply an iteration on the thingiverse pages below. Do not attempt this...
Topics: stl, Azeron, Video Games, thingiverse, Gamepad
Thingiverse Archive
May 1, 2021 Pitör Bäm (peed6687)
data
eye 0
favorite 0
comment 0
Simple transport box for EL84 electronics tubes. a rubber band is required to close it. have fun printing! likes me, supports me and drinks gin.
Topics: stl, Audio, electronic tube, EL84, audio, TUBE, guitar, electric_guitar, thingiverse, valve
Thingiverse Archive
May 1, 2021 Bao Xin Việc (baoxinvieccom)
data
eye 0
favorite 0
comment 0
Đừng quá ỷ lại vào việc làm bằng cấp giả. Làm bằng TOEIC giả chỉ là bàn đạp để giúp các bạn tiến xa hơn. Giúp các bạn qua được cửa vòng loại hồ sơ để nhận được các cơ hội phỏng vấn. Giúp bạn có nhiều cơ hội cạnh tranh hơn những ứng viên khác. Còn lại chính là lúc bạn cần phô diễn khả năng của bản thân để thuyết phục các nhà tuyển dụng chọn bạn....
Topics: stl, thingiverse, 3D Printer Parts
Thingiverse Archive
May 1, 2021 Andreas Karger (tuxzilla)
data
eye 0
favorite 0
comment 0
This thing uses a Helios 44-4 and an anamorphic projector lens adapter to create a single focus anamorphic lens. To complete this project, you will need the following: 1 x Neewer m42 - NEX adapter 1 x Helios 44-4 58mm lens 1 x 16mm anamorphic projector lens adapter 8 x 40mm m3 screw 3 x 30mm m3 screw 11 x m3 nuts 40-100 3mm ball bearing balls 8 x 6mm bearings A whole lot of patience You can see the whole assembly here: https://youtu.be/RUUiCcsgbgM
Topics: stl, Lens_Adapter, lens, Anamorphic_lens, Camera, gears, thingiverse, anamorphic
Thingiverse Archive
May 1, 2021 Blake Robinson (blakejrobinson)
data
eye 0
favorite 0
comment 0
Here's the model of my latest Battlezone print. It's a small-scale version of the CCA 'Flanker' from Activision's Battlezone. The model is based on the in-game one and customised extensively to add in the missing detail from the normal map, fix issues for printing and hollow it out. I've included chitubox file for those who use it (v1.8.1) that has the print set out and ready to go with supports. This is exactly how I printed the model for my pictures. Note that with this pre-arranged version...
Topics: stl, sci-fi, Vehicles, video_game, battlezone, tank, vehicle, game, thingiverse
Thingiverse Archive
May 1, 2021 Arthur Schlauch (aschlauch)
data
eye 0
favorite 0
comment 0
Heroscape C3V Bloodburst Thrall
Topics: stl, Toys & Games, heroscape, C3V, thingiverse
Thingiverse Archive
May 1, 2021 Mike Jos (Realmweaver)
data
eye 0
favorite 0
comment 0
+1/+1 and -1/-1 counters for the Magic the Gathering TCG or any other game that uses them.
Topics: stl, Hobby, TCG, thingiverse, magic_the_gathering
Thingiverse Archive
May 1, 2021 snakes snakes (snakesrules)
data
eye 0
favorite 0
comment 0
Remix from https://www.thingiverse.com/thing:3739133 Add about 15° tilt for better visibility . Add more clearance for better RT3S fit with battery eliminator
Topics: stl, thingiverse, Electronics
Thingiverse Archive
May 1, 2021 David Hassilev (Northnet)
data
eye 0
favorite 0
comment 0
These clips work with a 165x165mm glass bed for the Adventurer 3. They are designed to wedge the glass in place on top of the heated metal plate, but not clamp the glass. After 4 iterations I believe these work to hold the glass without depressing the metal plate. You need to print 3 of the long clips, one for the left side and two for the back. Print two of the short clips for the right side, and leave a gap in the middle for the fan shroud as it will interfere with 9 point calibration if you...
Topics: stl, flashforge, Glass Bed Clips, Flashforge_Adventurer, clips, 3D Printer Accessories,...
Thingiverse Archive
May 1, 2021 Tadeáš Horn (tadun)
data
eye 0
favorite 0
comment 0
These hexagons are designed to fit half of the prusament spool. I printed the second half in a different color, so that the time can be seen from afar.
Topics: stl, prusa, filament, time, clock, spool, thingiverse, wall_clock, 3D Printing
Thingiverse Archive
May 1, 2021 Rory Gowen (Eldritch_Soul)
data
eye 0
favorite 0
comment 0
Replacement fan for Rigid sander. OEM part number 830291. I made this part to replace a broken fan in a friend's sander since the part seems to have been discontinued. According to them it works fine.
Topics: stl, rigid, Parts, sander, fan, thingiverse
Thingiverse Archive
May 1, 2021 Pieter Paul Baron (p2baron)
data
eye 0
favorite 0
comment 0
A simpel box to mount a LeGrand electronical outlet. Should also fit other outlets. FreeCAD design included
Topics: stl, outlet, electrical_outlet, legrand, wall_mount, Electronics, box, thingiverse
Thingiverse Archive
May 1, 2021 juan falcon (juanfy)
data
eye 0
favorite 0
comment 0
Hi, I had my wrist band broken so i bought a new one. While the new strap arrives from china i ve decided to design a strap to use while i am doing some footing. The part is flat in the bottom so its really easy to print. I ve printed in TPU, but u can print it in any flex material. For the button i ve used the original one, i wanted to use the xiaomi button because its more durable than a printed part. The size of the part is almost the same as the original wrist-belt. You can print it in a...
Topics: stl, xiaomi_miband4, miband4, miband, strap, watchband, wrist-belt, band, thingiverse, Gadgets
Thingiverse Archive
May 1, 2021 Mike Jos (Realmweaver)
data
eye 1
favorite 0
comment 0
Some basic dungeon terrain to spice up your game! There are seven different files which should enable you to construct buildings and dungeon rooms of various dimensions. File #1 Short Wall File #2 Medium Wall File #3 Long Wall File #4 Archway File #5 Door File #6 2" x 2" Stone Floor File #7 1" x 1" Stone Floor
Topics: stl, diorama, dungeons_and_dragons, architecture, Dungeon, fantasy, pathfinder, wargame_terrain,...
Thingiverse Archive
May 1, 2021 James Smith (Tails86)
data
eye 0
favorite 0
comment 0
I took some inspiration from: https://www.thingiverse.com/thing:4818473 I don't consider this a remix because I used no part of the original files. This design also attempts to instead use the snap-in feature of the switch itself. It is not designed to be very serviceable as it's a pain to remove the bottom plate and the switch itself. The stress relief is designed for a 4 mm diameter cable. Just enough space is provided inside for such large cable. I personally used hot melt to isolate the...
Topics: stl, thingiverse, switchbox, DIY
Thingiverse Archive
May 1, 2021 Arthur Schlauch (aschlauch)
data
eye 0
favorite 0
comment 0
Heroscape C3V Banshees of Durgeth Swamp
Topics: stl, Toys & Games, heroscape, C3V, thingiverse
Thingiverse Archive
May 1, 2021 André Hainke (B0r8X)
data
eye 0
favorite 0
comment 0
Speziell für den Dremel 3d45 zum optimalem fixieren des Druckbetts. Leider ist die Halterung der Druckplatte nicht Optimal wodurch sich diese nicht nur horizontal sondern auch vertikal während des Drucks verschieben kann. Diese beiden Clips welche einfach nur auf die Halterung der Platte geschoben werden, fixieren das Druckbett so, das es fest in position bleibt und das in beiden Richtungen (nicht nur seitlich) Die Clips sind ebenfalls mit entsprechenden L/R Markierungen versehen. Leicht zu...
Topics: stl, Dremel3D45, 3d45, Printbed, dremel, Printbed_Clip, dremel_3d45, Dremel_Digilab_3D45, clip, 3D...
Thingiverse Archive
May 1, 2021 Ritchie Budd (Ritch-t-biscuit)
data
eye 0
favorite 0
comment 0
This is a wahoo cycling computer mount that is compatible with Giant computer mounts
Topics: stl, giant, Computer_mount, Sport & Outdoors, wahoo_elemnt_roam, cycling, bike_computer_mount,...
Thingiverse Archive
May 1, 2021 Valeri Rösch (roeschv)
data
eye 0
favorite 0
comment 0
https://www.thingiverse.com/thing:3095801 is a great and easy to assemble fuse holder design for standard ATO car fuses. I couldn't find anything alike for panel mounting so I created one and thought maybe it could be useful for someone else. Special thanks to SolarGermany!
Topics: stl, Fuse, Sicherung, fuse_holder, Electronics, Sicherungshalter, ATO, thingiverse
Thingiverse Archive
May 1, 2021 Mark Greco (Mark_Greco)
data
eye 0
favorite 0
comment 0
Feet for HP Test Equipment i added extra beef and refined holding areas. 12th revision seems to work great This foot fits both the HP Metal Enclosure and the plastic one as shown on my 59309A You may need a tiny bit of filing and fitting but other than that they work well. next design will click into the unit below. print this as it is uploaded. supports everywhere, 25% infill, a skirt helps. use dental tool or a pin to remove supports and a FINE emery board to fit them see the photos. Let me...
Topics: stl, test_equipment_feet, test_equipment, Electronics, thingiverse, hp_test_equipment
Thingiverse Archive
May 1, 2021 jhon jairo (jhonjairo)
data
eye 0
favorite 0
comment 0
This model is perfect in Motorola TALKABOUT T5000 radios fits without any problem.
Topics: stl, thingiverse, Other
Thingiverse Archive
May 1, 2021 Steve Douville (thebuyer2016)
data
eye 0
favorite 0
comment 0
This statue is an artistic representation of King Kafre a ruler of the fourth dynasty( 2575 B.C.E- 2465 B.C.E). Kafre’s time period was the Old Kingdom ( 2686 B.C.E -2181 B.C.E) . This statue was made of diorite and stands at a height of 66 1/8 inches. There is not much known about this Pharaoh. It is known that during his reign Kafre did construct the second pyramid of the three Pyramids of Giza. There are some accounts that were written by Herodotus, but those were produced many years after...
Topics: stl, Egypt, Egyptian, thingiverse, Sculptures
Thingiverse Archive
May 1, 2021 Landon Dematteo (Jango_Fett)
data
eye 0
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
May 1, 2021 ma rk (mark2030)
data
eye 0
favorite 0
comment 0
I needed a to hold the Surface tablet in the tractor, I will add a pic of how it was mounted, I used brackets that are for mounting and holding slow moving vehicle sign and bent the flat part down like you can see in the pic. makes it easy to move to different vehicles.
Topics: stl, thingiverse, DIY
Thingiverse Archive
May 1, 2021 jean lima (fanzking)
data
eye 0
favorite 0
comment 0
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
May 1, 2021 Sami Onur Zaim (onurzaim)
data
eye 0
favorite 0
comment 0
Center hole is for 5mm square grip. This is faucet handle for griping of 5mm square tap. I made this becasue of 5mm square turning tap was detroying the ones I buy from hardware store. Either with PLA or Petg its much better now. I dont have any water leakage anymore. I bundled gasket for using with a TPU filament.
Topics: stl, faucet_handle, Bathroom, tap, faucet, water, thingiverse
Thingiverse Archive
May 1, 2021 Nick DeVries (TechnickSlide)
data
eye 0
favorite 0
comment 0
A few sizes of circle dimple dies. I wasn't a big fan of what I was able to find so I made my own. These feature a hole through the center for a half inch bolt to be used if you don't have a press. If using that you will need some sort of backing plate. I used 1/4" steel plate for this as you will see in the pictures. These worked great with using an impact on a bolt on 16ga cold rolled steel. I have no idea what the limit is for how many can be done but so far I've been able to do 40...
Topics: stl, tools, fabrication, metal, Tools, Die, Dimple, thingiverse, punch
Thingiverse Archive
May 1, 2021 bossPOSES mcintyre (Kodiking)
data
eye 0
favorite 0
comment 0
This is just the head... The full verison can be found at the link below https://www.cgtrader.com/3d-print-models/miniatures/figurines/bossposes-calamity-blood-moon
Topics: stl, Model, Zelda, thingiverse, Miniature, breathofthewild, Mini, ganon, figure, 3D Printing, New
Thingiverse Archive
May 1, 2021 Arthur Schlauch (aschlauch)
data
eye 0
favorite 0
comment 0
Heroscape C3V Bahadur
Topics: stl, Toys & Games, heroscape, C3V, werewolf, thingiverse
Thingiverse Archive
May 1, 2021 Guemo falippou (guemofalippou)
data
eye 0
favorite 0
comment 0
For "generic" aliexpress ebike frame Pretty simple, two long M6 (50 - 55mm) + washer + nut to hold the part to the swingarm. I'm using 6001 bearing with M3 adapter in the center and two washers on the sides so it can rotate freelly once tightened Sketchy but functional
Topics: stl, bike, ebike, DIY, bearing, chain, tensioner, thingiverse
Thingiverse Archive
May 1, 2021 Števo Bojačko (Boj3D)
data
eye 0
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, thingiverse, Automotive
Thingiverse Archive
May 1, 2021 Steve Douville (thebuyer2016)
data
eye 0
favorite 0
comment 0
The Ahiram sarcophagus was the sarcophagus of a Phoenician king of Byblos, discovered in 1923 by the French excavator Pierre Montet in tomb V of the royal necropolis of Byblos. The sarcophagus is famed for its bas relief carvings, and its Phoenician inscription.
Topics: stl, Egypt, Egyptian, thingiverse, Sculptures
Thingiverse Archive
May 1, 2021 Tomas P. (tom666)
data
eye 0
favorite 0
comment 0
Hotend Bowden & Cables Holder for Ender-3 V2.
Topics: stl, cable_holder, Ender_3, 3D Printer Parts, thingiverse
Thingiverse Archive
May 1, 2021 jean lima (fanzking)
data
eye 0
favorite 0
comment 0
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
May 1, 2021 Arthur Schlauch (aschlauch)
data
eye 0
favorite 0
comment 0
Heroscape C3V Arktos
Topics: stl, Toys & Games, heroscape, C3V, werewolf, thingiverse
Thingiverse Archive
May 1, 2021 Damiano Careddu (Damiunskj)
data
eye 0
favorite 0
comment 0
Short tutorial: 1) Buy the "swiffer" broom or get it back if you don't use it 2) Print the grip (with Brim) 3) Build the swiffer without the end tube and without the handle 4) Fit the grip into the end of the swiffer tube 5) Place your feet on the base of the Swiffer ... enjoy it !! Based on the Grip of Tauras art
Topics: stl, cloche, Toy & Game Accessories, oculus_quest_2, grip, thingiverse
Thingiverse Archive
May 1, 2021 Kelemen Levente (KF_Projects)
data
eye 0
favorite 0
comment 0
Topics: stl, flower, 3dflower, Decoration, thingiverse, 3D Printing
Thingiverse Archive
May 1, 2021 Paul Baker (PDBCreations73)
data
eye 0
favorite 0
comment 0
1/12th scale TODO 360 Droid. All parts should snap together and allow for some articulation. Adjust the size of parts based on your printer tolerances. I tend to print these a bit tight and use sandpaper to get them to fit. The arms and legs are very thin and brittle. Mirror the leg and arm in your slicer to get LEFT and RIGHT parts.
Topics: stl, thingiverse, Toys & Games
Thingiverse Archive
May 1, 2021 Roland Seili (netzlast)
data
eye 0
favorite 0
comment 0
Remix for "Innovateking DC-DC Buck Converter Step Down Converterer iPhone/ QC2.0/ QC3.0/ DCP/FCP" Í bought from AMAZON. Board size 38,1mm x 19,2mm x 9,4mm Fit PENTAX D-Li90 Flip in slicer 90% to the plan side and print without support! Stick the parts together with a little bit of superglue.
Topics: stl, thingiverse, Camera
Thingiverse Archive
May 1, 2021 jesus lopez norte (zorroronoa)
data
eye 0
favorite 0
comment 0
caja toad mario bros, forma parte de una colección sobre cajas de Mario no olvides visitar mi perfil y si quieres saber como se hacen este tipo de cajas aquí te dejo un video tutorial, también decir que las tapas a partir de 2mm puedes cambiar el color igual que hice yo saludos https://www.youtube.com/watch?v=fWUNjr4nrJQ
Topics: stl, Decor, toad, mario, toad box, super_mario_bros, toad mario, caja, bros, thingiverse, caja...
Thingiverse Archive
May 1, 2021 Nicolas Necalaco (Necalaco)
data
eye 0
favorite 0
comment 0
it's a remix of : https://www.thingiverse.com/thing:33912 I kept the tie that I modified to make it very very tight. the blade does not move at all and makes the scalpel very precise
Topics: stl, blade, scalpel, Hand Tools, thingiverse, cutter
Thingiverse Archive
May 1, 2021 Fragol Roc (Fragol_Roc)
data
eye 0
favorite 0
comment 0
This is an LED housing that is made to slide over the underside of the NES-101/AV Famicom to provide a power indicator light. Other methods involve having to drill a hole in the shell, however, this allows you to attach an LED without damaging the shell. Fishing the wire through the guide can be a little tricky, so be careful. I use 28 AWG wire and a 3mm white LED for this mod. Make sure you use at minimum 370 ohm resistor when wiring the LED as to not blow it out. If you would like a QSB...
Topics: stl, LED, Nintendo, Famicom, NES, Electronics, thingiverse
Thingiverse Archive
May 1, 2021 Arthur Schlauch (aschlauch)
data
eye 0
favorite 0
comment 0
Heroscape C3V 12th Caucuses Rifles
Topics: stl, Toys & Games, heroscape, C3V, thingiverse
Thingiverse Archive
May 1, 2021 Darrell Louderback (Dloud81)
data
eye 0
favorite 0
comment 0
If you are looking at this you had the same issue as me where the hydroflask didnt fit the car or trucks cup holder. I made this to fit both cars and allow for a coffee cup with a handle. This was my first design so its not the best, but not terrible either. This fits our 2017 Subaru Forester (you need to lock your cup holder) This also fits a 2017 Chevy Colorado
Topics: stl, Forester, Automotive, SUBARU_FORESTER, cup_holder, Colorado, Chevy_colorado, hydroflask,...
Thingiverse Archive
May 1, 2021 dd lorence (any_user)
data
eye 1
favorite 0
comment 0
After finding out that the hole I designed and printed was to small or too large, I decided to print some gauges so that I could design the appropriate hole for the screw or bolts I was planning on using. I most often use 3mm, but decided to print all three gauges just in case. I printed with a color change for the text so that i would show up better.
Topics: stl, thingiverse, 3D Printing Tests
Thingiverse Archive
May 1, 2021 Leon Thürnau (lethuer)
data
eye 1
favorite 0
comment 0
I couldn't found an suitable stl file on thingiverse so I redesigned the original one for SL% V2.1 frame.
Topics: stl, thingiverse, R/C Vehicles
Thingiverse Archive
May 1, 2021 joe lepack (Mrmustang48)
data
eye 2
favorite 0
comment 0
Simple dick with wings made for a fellow 3d printer person.
Topics: stl, thingiverse, 2D Art
Thingiverse Archive
May 1, 2021 Alex Thaller (AThaller)
data
eye 1
favorite 0
comment 0
A remix of https://www.thingiverse.com/thing:3164882. I added a section on the housing for a 3 pin toggle switch with a base of 6mm.
Topics: stl, thingiverse, Electronics
Thingiverse Archive
May 1, 2021 Antoine Bouvier (antoine2706)
data
eye 1
favorite 0
comment 0
This was designed to hold a JBL Charge / Charge 2 / Charge 2+ on the side of a shower door. This can also be used to attach the speaker elsewhere, to have more room on a kitchen counter for example. With these dimensions, the part is robust and will easily hold the weight of the speaker. Vibrations from the speaker through the hook are minimal, there is no spurious noise. The maximum thickness the hook will allow is 25mm. Feel free to contact me if you desire any modifications. Enjoy!
Topics: stl, shower, Audio, speaker, elegant, bluetooth_speaker, music, hook, Speakers, attach,...
Thingiverse Archive
May 1, 2021 Gašper Doljak (GZTproject)
data
eye 1
favorite 0
comment 0
A simple door handle lock to prevent our cat from shutting us out on the balcony. It attaches using double sided tape around the door handle. The hinge comes loose after printing.
Topics: stl, cat, handle, lock, door, latch, thingiverse, Pets
Thingiverse Archive
May 1, 2021 Tian Chris (Knou)
data
eye 1
favorite 0
comment 0
1 - Print the file, i only tryed with SLA printer and don't know if it works with FFF 2 - Cut 11 pins 2.54 long (https://fr.aliexpress.com/item/32993182990.html) 3 - Remove the 4th and 8th pins with small pliers 4 - Mount and glue the 2.54 pins 5 - Mount and glue the mini usb (https://fr.aliexpress.com/item/32916626306.html) 6 - Wire the board with 5 rainbow color (2 GND, 1 VCC Hotend cooling, 2 VCC Part cooling) 7 - Solder and glue mini USB (https://fr.aliexpress.com/item/32964360323.html) 8 -...
Topics: stl, cable management, kingroon, kingroon_kp3s, kp3s, 3D Printer Accessories, thingiverse
Thingiverse Archive
May 1, 2021 Pawel Lugowski (plugowski)
data
eye 1
favorite 0
comment 0
Mount for Meilan X5 lamp for board. Works perfectly with Wowgo AT2 Meilan X5 - https://s.click.aliexpress.com/e/_AAnaQZ
Topics: stl, wowgoat2, wowgo at2, taillight, Hobby, thingiverse, wowgo
Thingiverse Archive
May 1, 2021 Andy Miller (RedShark)
data
eye 0
favorite 0
comment 0
I have designed a holder for a Raspberry Pi. The holder has mounts for 40x40 mm rails like the ones on the Ender 3. Therefore no screws or similar are needed for the mounting. In addition, the holder is very material-saving to print and can be used flexibly because with two or more holders the distance on the rail can be adjusted freely.
Topics: stl, rail, Ender_3, ender_3_v2, holder, Raspberry_Pi, mount, rail_mount, thingiverse, Tool Holders...
Thingiverse Archive
May 1, 2021 Richard Müller (richmlr)
data
eye 0
favorite 0
comment 0
English: Clamp carrier for roller blinds with a rail width of 40 mm and window frame thickness of 15.5 mm (all standard). stl and skb file to keep it editable Deutsch: Klemmträger für Doppelrollos mit einer Schienenbreite von 40 mm und Fensterrahmendicke von 15,5mm (alles Standard). stl und skb file zum ggf. ändern
Topics: stl, thingiverse, Klemmfix, Replacement Parts
Thingiverse Archive
May 1, 2021 Steve Douville (thebuyer2016)
data
eye 0
favorite 0
comment 0
Pharaon
Topics: stl, Egypt, Egyptian, thingiverse, Sculptures
Thingiverse Archive
May 1, 2021 Števo Bojačko (Boj3D)
data
eye 0
favorite 0
comment 0
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner and the back-center. A M3-.50 nut is required.
Topics: stl, thingiverse, Kitchen & Dining
Thingiverse Archive
May 1, 2021 Enrique Courtade (Quiquin)
data
eye 0
favorite 0
comment 0
Una simple caja de 120x90x90cm que puede ser personalizada a las medidas que se quieran (longitud, ancho, alto, grosor de pared, holgura del clip de la tapa) utilizando los parámetros en Fusion 360. La tapa se redimensiona sola a los cambios realizados en el cuerpo de la caja. Si se quiere se puede hacer en dos procesos en Simplify3d, el primero con una altura de capa de 0.3mm para la mayor parte del cuerpo de la caja y la parte superior (donde está el borde que hace de fijación con la tapa)...
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
May 1, 2021 jesus lopez norte (zorroronoa)
data
eye 0
favorite 0
comment 0
caja peach mario bros, forma parte de una colección sobre cajas de Mario no olvides visitar mi perfil y si quieres saber como se hacen este tipo de cajas aquí te dejo un video tutorial, también decir que las tapas a partir de 2mm puedes cambiar el color igual que hice yo saludos https://www.youtube.com/watch?v=fWUNjr4nrJQ
Topics: stl, peach box, Princess_Peach, Decor, princess peach box, princes peach, caja, caja princesa,...
Thingiverse Archive
May 1, 2021 Elliot Larnach (EBOL555)
data
eye 0
favorite 0
comment 0
This was a quick case I have made for an Arduino Nano. It hasn't been tested yet but should in theory work well. any comments, suggestions or changes feel free to leave a comment.
Topics: stl, nano, Eletronics, Arduino_Nano, arduino, Electronics, thingiverse, case
Thingiverse Archive
May 1, 2021 Paula Malone (Prettip25)
data
eye 0
favorite 0
comment 0
null
Topics: stl, thingiverse, 3D Printing